Showing posts with label &$#*&. Show all posts
Showing posts with label &$#*&. Show all posts

Thursday, March 21, 2013

BLOW HO HO


White Cay, Berry Islands, Bahamas


"Be sure you're tucked in somewhere with west protection by sunset," weather guru Chris Parker said ominously on the SSB as we sat anchored in water wide open to the west.

Okay, 'wide open' is not quite correct. We were surrounded by flats, which break up any big swell, but do nothing about the wind.

The forecast was for a front to swoop through just after sunset (why always at night) kicking up 20-knot wind with periodic nasty squalls. The blow would end by noon the following day.

We looked at our options, debated and decided to reanchor a little further out and sit it out.

It wasn't a decision we were thrilled with but neither was it scary. Should the anchor give way, we would be blown toward sand, not rocks, and we would spend the night ready to pounce, get the anchor up and motor to safety. Not really relaxing but not dangerous either.

When I went forward to lift the anchor to move, I could see through the crystal water that our chain was wrapped and wrapped around a huge-ass rock. Very disconcerting.


I pointed, Chip turned the boat, I reeled in chain. We overshot, backed up and, what?!?! The chain was free. A pre-storm miracle.

We hunted and pecked around for almost an hour trying to find an ideal spot to anchor, no grass, good bit of sand, deep enough water in a 300-foot circumference so we could swing on anchor.

Finally at rest, some Bahamian fishermen motored up just before sunset and gave us a grouper in exchange for two beers.

"Do you think we'll have a big storm tonight?" I asked, assuming fishermen were good weathermen.

"Oh, no. We'll have a beautiful night," he said.

Bahamian fishermen v. Chris Parker. Any wagers?

Sure enough, we could see the front coming toward on the waning sunlight. As darkness fell, the wind kicked up.

There it is! Maybe it will pass north of us?

By midnight it was howling, and we were getting quite a ride on short, choppy water.

I lay in the v-berth going over my anchor drill, puzzling over how I would release both the snubbers, how much chain I would pull in before checking to see if it was piling up wrong (we had 125 feet out). I pondered how in the heck we would find a patch of sand in the dead of night when it had taken us 45 minutes to find one in the daylight.

The tide shifted around 2 a.m. putting the anchor against both wind and current. The snubbers groaned and the wind howled, but the anchor held. Every 30 minutes I opened up Navionics on the iPad to check our position. Our anchor held beautifully.

There was little sleep and a little nausea but nothing to report.

Would I do that again? Probably not. We were lucky that we didn't have squalls. Marsh Harbor to the north got a 50-knot squall with rain, lightning and hail. Eek.

Chris Parker: 1
Fishermen: 0

We rested today and are ready to sail south to Nassau. The farther south we get, the calmer the weather.

South! South!

An inland, saltwater blue hole.

Where some swam ....
... while others watched. Creepy.

Wednesday, February 20, 2013

NAUTICAL TORTURE: DAY FIVE

St. Augustine




Well, if yesterday dawned all grim, today dawned hopeful with potential for catastrophic failure at every turn. On Day Five of this two-day project, what we had, was not a windlass, but a bin of parts and a gaping hole in the bowsprit.

Team Windlass, Chip and our friend John visiting from D.C., had already worked pseudo miracles getting the thing apart (with an assist from a gear puller, our dockmaster and a machinist). Now their plan was to clean all the parts, get a new screw to replace the one we stripped, and, gasp, reassemble the whole thing. Oh, and hope it works.

There were two potential Looming Catastrophes:
  1. Could they, by hand, replace the shaft that required 6,000 pounds of pressure to remove?
  2. Would the burr on the shaft, prevent the clutch from going back on?
  3. Would we be stuck in St. Augustine forever?
Work to be done!
Okay, I know, that's three.

So, we huddled up first thing, got our assignments and went to work. Mine was the easiest. I had to clean the anchor locker around the gaping hole, clean the contacts and terminals and grease them.

With that accomplished, I spent the rest of the day zooming around with final provisioning runs. Then, filled with hope, I started stowing like mad, turning the boat into a working vessel again.

John started cleaning the windlass parts with diesel fuel. Chip took off to find the screw. It was metric. They didn't have it. He had to get a makeshift version, a bolt, actually. Would it work? We didn't know.

With all the parts clean, they started reassembly. As I occasionally passed them in the cockpit, they were most often in grim discussions, looking hopeless and defeated. Sometimes, the sense of foreboding was punctuated by shouts of joy and high fives.


The shaft went back in by hand after a good amount of consternation, because it wouldn't drop down into the worm gear. It was bumping against the oil seal on the bottom of the unit requiring a surgical, tweezer maneuver to get it to seat properly.



Looming Catastrophe #1 averted.
The makeshift bolt had to be rigged.

It worked!
Then they had to fill the oil. Doesn't that sound easy? The directions don't say how much to put in. You have to turn it horizontal to fill it and then vertical to check it. Much trouble, filling, overfilling, draining, etc.


Once that assembly and the #*&$#ing filling was finished, it had to be attached to the motor and the whole thing installed and then wired in that dastardly anchor locker. Chip pulled the shaft from above deck, John held it in place from below, Chip put in the bolts, John did the wiring, and the installation was done.


Now our first major moment of truth: We turned it on. It worked. Shouts of joy.

Then the above deck assembly began and Looming Catastrophe #2 approached. The clutch did, in fact, stick on the burr. If they couldn't get it in place, the entire Day Four torture would have to be repeated. They would have to uninstall it, disassemble it and take it to a machinist.

They put a PVC pipe over the shaft and tried tapping the clutch down, trying and trying to get it to drop, feeling more and more fatalistic about the clutch and our future in St. Augustine. If it would just drop into place, there were only three pieces remaining to be installed to complete the job.

"Just wail on it," Chip told John.

He did. It dropped. Shouts of joy. Looming Catastrophe #2 averted.

They threw the drum on, the clutch nut and had only to put in the last screw into the shaft to be done. Yes!

The screw would only go half a turn. Apparently the gear puller damaged the threads. AAAAAHHHHH!!! 

Chip came below and grimly got out his tapping set, bought years ago and never used. He measured the bolt. It was metric, but, miraculously, the set had the appropriate tap.

Major gloom hung over Cara Mia. If this didn't work, the entire Day Four torture would have to be repeated, yes, taking the shaft to a machinist to bore a new hole and tap it.

Chip inserted the tap, held his breath and turned a quarter turn. Removed the tap and tried the screw. Nope.

He reinserted the tap, held his breath and turned a half turn. He could tell it was cutting the threads, potentially destroying them. He removed the tap and tried the screw. Nope.

He reinserted the tap the third time, held his breath, cringed and turned a half turn.

"Just one more turn," John said, knowing this was the end. It would either work, or we had to start over.

Chip turned it. The tap grabbed and moved smoothly. He removed the tap and tried the screw.

It went something like this:



(In this reenactment, I am played by Sophia Loren.)

Tuesday, February 19, 2013

NAUTICAL TORTURE: DAY FOUR

St. Augustine


Today dawned all grim. We discussed our options, and none of them were happy options. They went something like this:
  1. Put the whole thing back in place and pray.
  2. Get a gear puller and potentially break the clutch. (See #3)
  3. Get a new windlass, which would involve untold acrobatics. A new one would take a week or more to have delivered, then installed.
So, as we often do when we have a difficult decision to make, we threw the question into the universe and asked for an answer.

Chip called the manufacturer and got several good tips, including this one: Never try to remove the casing and motor from belowdecks. You'll never get those allen bolts out.

So much for relying on the internets for step-by-step instructions. #FAIL

Then the same guy said we were on the right track with getting that #*$&@ing bronze clutch cone off. There is nothing holding it in place. We should use a gear press. As a bonus, he said they had a new model of our windlass with, ahem, some improvements (the worm box now snaps out without removing the entire unit DUH). It has the same profile and would easily fit  into the hole already in our deck. Backup plan!

Chip called the auto parts store nearby.* They had a gear press. The universe was putting out signposts.

Returning on his bike, Chip was buoyant. They had loaned him the gear press for free.

Okay, now things were seriously looking up. Could this be a rare and coveted 'yes' day?

Our friend John is visiting from D.C., here to ride south with us if we can get this show on the waterway. So, Chip and John headed to the bow with their new toy like two boys on Christmas morning.


They put the gear puller over the shaft and extended the legs.


A pall fell over the proceedings. Excited little boys turned sullen and puzzled.

They tried C clamps.


#*&$#@*& &#*$. 

The dockmaster had been rolling a cigarette, watching the proceedings as he rolled a cigarette

"Hold on," he said, and came back minutes later with extender arms for the gear press.




YES!!!! Bronze clutch cone removed. Applause, shouting. High fives.



Bolts unbolted. Casing and motor dropped. Electric motor detached. Parts flew off and were subsequently retrieved (amazing). 

Now, just pull the shaft to change the seal. 

Um, no. Shaft not going anywhere.


Bang, bang. Gear press? No. Not moving.

A dockmate told us of an eccentric machinist named Dale one mile away. Chip removed the motor (brown cylinder) loads up the casing/shaft on his bike and off he went.

One hour later, he returned with stories of Dale and with three parts, now duly separated. The stripped screw was bored out and rethreaded. Even the machinist had a difficult time getting it out. Stripping it, apparently, was not our fault. Dale said we'd never had gotten it out. The shaft? It took a stunning 6000++ pounds of pressure to remove it! It is now newly lathed. The whole shebang, $20.

At the end of day four, we have no windlass but a series of pieces. The hard part, hopefully, is behind us.

In this process today, they found several broken clips and a stray piece of line inside the unit. We have been very lucky this thing has served so admirably. Thank you, windlass.

The service kit ordered from the manufacturer.
No worries! replacements for the broken clips included.
Let the cleaning and reassembly begin! Can we please have another 'yes' day?

Two more two-mile provisioning runs today
with $12 pillow snagged in bonus round.
I love YES days!
*Advanced Auto Parts loans tools for merely leaving a deposit.
**Special thanks to John for serving as our staff photographer today.

Sunday, February 17, 2013

NAUTICAL TORTURE: DAY THREE

St. Augustine

How to keep parts from flying overboard.
St. Augustine is a lovely place to be stuck. Stuck indeed.

After Day One and Day Two belowdecks, we went toward the light. Our plan was to remove the winch above the deck, allowing us to drop the motor from above.

Chip started on it, and by the time I got up there, he had the first five pieces removed. WOW! Good omen. Then he got to this one, and it was s-t-u-c-k.


I went on a provisioning run. When I got back he had it off.

Then there was this bronze piece:


Stuck like my mind on the Bahamas.

Many hours and three consultations* later, there she stands. Really? A bronze ring away?

(That silver plate would come off next, exposing the four bolts holding the casing and motor below deck.)

Tomorrow is another effing day.

*Special thanks to Joe on s/v Kajon for phoning in moral support.

Saturday, February 16, 2013

NAUTICAL TORTURE: DAY TWO

St. Augustine


Crikey. Yesterday's struggle with the windlass continues.


We made zero progress on the offending screw despite a full day's effort -- mostly by Chip.

I removed the platform to give Chip more room and to get the drill to fit under the casing. Then I left on the 1.5-mile trek to the laundromat, followed by the 1-mile trek to the grocery store for another provisioning run.

That's the platform leaning on the left. Bigger than the door.
Meanwhile Chip tried several Grabit bits to get the thing out of there. They grabbed and then let go.

Merde.

The only option left from below is to drill it all the way out in this position:



Tomorrow we try to disassemble the windlass from above deck.

This is how sailors learn to curse.

Friday, February 15, 2013

NAUTICAL TORTURE: DAY ONE

St. Augustine


Boat designers have a sinister side. That photo is taken from our bed. The opening is the anchor locker which holds all the chain we use for anchoring. The pole in the middle is the staysail boom, which goes through the deck. The little round silver thing I'm peering at is the windlass motor. Behind it is the casing for the windlass.

The windlass is an electric winch that raises and lowers the anchor by just pushing a button. The maker of our windlass constructed it so that the oil cannot be checked or refilled without removing the entire unit belowdeck.

Effing hell.

Since I'm long and thin, I volunteered to go in and take out the four screws holding it to the deck. The screws must be removed with an Allen wrench. Seriously.



You can't really tell, but the unit is still way beyond where I am, requiring me to stretch my arms overhead, find the screws, maintain upward pressure while trying to unscrew them. At first I was mostly worried about how a) I would hold the 10-pound thing in the air while getting the last screw out and b) how I would ever get the effing thing back in there when we finished rebuilding it.

Ah, but I was counting chickens or borrowing trouble or some trite saying about getting ahead of myself.

The first screw, the only one I could see, came loose with only about 15 minutes of effort. The second a little less. The third was not bad. The last one is in a complete blind spot on the far side of the casing.

Using a mirror on a stick, I was able to get the wrench into the screw, but did not have the strength or torque to get it loose. I tried for about an hour, and I'm pretty sure I stripped it. I gave up.

Chip forced himself in there.


That door is SO SMALL.*

He tried for an hour or so. We regrouped. I found another set of Allen wrenches. Chip went in to confirm it was the screw that was stripped, not the wrench.

It gripped. He turned. The wrench flew out never to be seen again. Chain locker. Piles of chain. AAAAAHHHHH!!!!!!!

We sealed the effing locker up for the night and went to meet friends for dinner. Tomorrow is another frigging day.

*As a special bonus, the camera flash is picking up some white mildew on those door slats. We can't see it otherwise. AAAAAAHHHHH!!!!!!

Monday, June 18, 2012

CHIPDATE

Chip, off to the dentist.
After our visit to the emergency clinic yesterday, we knew our trip to Paris was in the balance. The doctor thought Chip had an abscessed tooth. Would they be able to treat it in time for us to fly tomorrow?

There's a dentist at the end of the marina parking lot (!), and we were waiting on his doorstep when he opened this morning at 8 a.m.

It started out all gloomy.

"No way you'll be able to fly tomorrow if it's abscessed," the assistant said. "We're not even sure if the doctor can see you. We're booked solid."

We begged for a diagnosis at least, so we would know what to do. Georgians are so nice. They squeezed him in for an X-ray.

I emailed the airline about canceling from the waiting room.

By 9 a.m., we knew that it was not abscessed, it was cracked and infection had set in. The tooth needed to be pulled.

During the X-ray, another patient cancelled their root canal. Magical opening for a tooth to be pulled! And, even better news: He can fly tomorrow!

We went back to the boat, cautiously optimistic, waiting for the dentist to call when there was an empty seat.

At 10:00, Chip was off to get the offending tooth yanked.

By 11:00, he was home and suffering, but pain meds kicked in by 1 o'clock. The swelling is starting to go down, with the help of an ice pack.


It's not a great start, but Paris, here we come...

Allons y!!!

Saturday, June 16, 2012

WAYLAID BY A CHIPMUNK

Brunswick, GA


We had a lovely evening on Friday with brand new cruisers, Bill and Susan, on the Island Packet Grace docked next to us. They are setting off this fall for the Bahamas, so we went through charts, sharing great spots, just like others did for us two years ago.

When we got home, Chip said his cheek had started hurting during dinner. By Saturday morning it was swollen and terribly painful.

The doctor thinks it's an abscessed tooth. We'll see a dentist Monday morning to confirm. Antibiotics and Vicodin in the meantime.

We don't know anyone here in Brunswick and don't have a car. The health clinic is four miles away. I went into the marina lounge and asked the only person in there if she had a car. Carol and Dave on S/V LightHeart drove us to the clinic and then picked us up two hours later, wanting nothing in return.

That's how the sailing community works, give where you can, take when you need help.

Friday, June 8, 2012

DID THEY MAKE IT?

Brunswick, GA 31º9.270N | 81º29.975W


If you've "liked" our ploddingINparadise Facebook page, you already know the answer to that, but here's the story:

When I flew back to Ft. Lauderdale from New Mexico back in May, I had a fantasy about west wind and glassy seas allowing us to make a 3-day offshore passage all the way to the Georgia border. My fantasy was fully realized only, as usual, I didn't have the foresight to wish for everything. I forgot to hope for west wind and glassy seas with NO SQUALLS. We've had an amazingly long spell of offshore west wind, but the actual weather has been nasty. We couldn't make a single offshore hop in the last three weeks. If you've been reading, you know our last few days have been trying weatherwise. And then there was today.

First, can I just say, my husband is awesome. I'll tell you one of the many reasons later.

Second, finally, the weather prediction was right about last night.

To review, we were anchored in a narrow creek in shallow water with no real wind protection and not enough anchor chain, which means at any moment we could have been adrift, requiring us to throw on foulies, start the engine, and re-anchor in the dead black of night. All was well until about 11 p.m. when the howling wind woke us up as a big squall came rushing down Shellbine Creek. Chip checked the wind indicator, and it was clocking in the mid 20s, gusting higher. It always sounds worse at night.

To make things more nerve-jangling, this nasty squall hit right at high (6-foot) tide, the optimal time for our short anchor chain to be vulnerable. We both prowled around looking out hatches to see if we were dragging, but in the pitch black, there were only two points of reference, the flashing green mark at the east end of the creek and the anchor light of another anchored boat in an adjacent creek (assuming they weren't dragging). Under full cloud cover and pouring rain, it was hard to judge. The iPad offered some reassurance, showing our exact location on the chart using GPS. That awesome Georgia mud and our Delta anchor were sticking together.

That first squall lasted about an hour, and thankfully had no lightning. We went back to sleep and were wakened once again at 2:15 by the howling wind. Another squall, this one bigger and more enduring. In fact, the wind didn't actually let up this time.

Before going to bed, we had studied the tide and current charts to make our plan for crossing the dreaded Saint Andrew's Sound. For the last week, mornings have been relatively squall-free, so we decided to shoot for low tide, an early morning dash. Not ideal, but nothing has been ideal the last few days. Done is better than ideal.

The alarm went off at 5:45 before the predawn haze. We raised the anchor at 6:15 just before the sun rose on several inauspicious signs. First, when I was raising the anchor with the windlass, the voltage dropped so low that we lost power briefly. Then, once the anchor was up, Chip threw the throttle forward, but nothing happened. We were aground. The rising water or luck or something changed, and then we moved. For folks who look for signs, this was not a good start. I took the helm for the first shift and headed to the end of the creek toward that flashing green mark we used to reassure ourselves that we weren't dragging anchor in the dead of night.

As I turned out of the creek, toward the Sound, it was into the face of 25 knots of wind and surprisingly big swell, shocking really, coming straight at us, much larger than yesterday. I hadn't seen Cara Mia hobby horse like that since the Tongue of the Ocean in the Bahamas. I was at the helm, and I only got about a quarter mile before I turned back. We dropped anchor in the same spot, despondent and exhausted.

I emailed our friend G.W. to see if he could make sense of this "10-15 knots with light chop" situation, which was in fact 20-25 with 6-8 foot swell -- before we even reached the open water. I asked if he could tell where it was headed using his weather resources. Would it move out today? Tomorrow?

He had mentioned the day before that there was an alternate route across the Sound, so I started investigating.


In that chart above, the common route is the one on the right, heading right out under the ocean's skirt. The wind had been blowing in the 20s from the northeast for at least 24 hours, which means the swell had plenty of time to build.

We were anchored at A2 in Shellbine Creek. The red line on the left is the alternate route through Floyd Creek, a reportedly shallow, shoaly passage.

High tide was at 1:00, so if there was any chance to make it through Floyd, we would need to leave soon after 10 to ensure we made it through on a rising tide (so if we ran aground, water was on the way to lift us off). We synchronized our watches, set the alarm for 10 a.m. and went to sleep.

At 10, Chip hailed for local knowledge on Channel 16. A tugboat captain volunteered that it was bad in St. Andrew's, and he himself found the swell too big and was ditching through Floyd. Another sailboat hailed us to say they were out in the Sound at that moment making the turn between the shoals fielding 6-8 foot rollers on the beam.

Yeah, no thanks.

We were surprised to hear from that boat, because it was one of the ones we assumed had crossed yesterday when we had turned back. They too felt conditions were iffy, but they anchored with several other boats in the spot that we felt was too exposed. They reported a dreadful night with anchors dragging and tangling, big swell, miserable. At least we made one good choice, although deep in the night, with a squall bearing down, I wondered if we should have buckled down and pushed through the Sound. If so, we would have been tucked safely in a marina slip in Brunswick ... in a marina slip in Brunswick ... in a marina slip in Brunswick.

With real-time reports from the Sound, we made our decision to go through the backwaters of Floyd, I checked my email and found corroborating info on the weather  and the viability of Floyd Creek from G.W., so, once again, we raised the anchor and headed out. It had stopped raining and the sky to the north was encouragingly bright. Chip took the first shift and as we headed again out of Shellbine Creek, dolphins surfaced all around us. Mm hmm, that's what I'm talkin' about, a good omen.

As we headed toward the first curve in Floyd, that tugboat captain who advised us earlier came barreling toward us. He was even bigger than we imagined:


If he thought the swell was too big, we had no business messing about there either.

While Chip wormed us through the winding creek, I went below to stow, anticipating big swell in the open Sound, because even though we weren't going out to the tip, we still had to cross it further inland. Floyd turned out to be lovely and not particularly shallow. Chip never saw less than 10 feet at high tide, so most boats could pass at high tide with no problem.

We rounded into the Sound right at noon, an hour short of slack (unmoving) tide and could feel the swell. With an hour of tide still coming in, it was slow going through 5-6 foot swell, but we could hug the south side of the Sound until it lessened. Then we had to cross.

Guess who's watch came just before the crossing? Yes. Why me?

This is the part where I can tell you how awesome Chip is: He volunteered to take my watch all the way across. Perhaps he was really just guarding against my turning back a third time (!), but I loved him for it. Really, he felt bad that this entire week I've been drawing the bad shifts. He knew my nerves were frazzled, and he was being heroically nice. Thanks, Chip.

When you're in rolly conditions, the GPS takes a long time to react to the movement, so if you're accustomed to solely navigating by looking at the computer screen, well, no good. I used the binoculars to spot bouncing marks that weren't bouncing but looked like they were in the bumpy water. I used the iPad and its GPS to make sure we were on track.

Chip steered us smoothly in the big swell, which kept moderating as we made the 5-mile trek down the Sound. By the time we reached the tip of Jekyll, it was down to big chop (fine, we'll take it).

We made an easy pass inside of Jekyll and turned west, thrilled to approach the bridge in Brunswick.


We were feeling transcendent. Smooth water, sun. The only other blip on our horizon was this:


Two adolescent girls in incredibly tiny sailboats, far out in the Brunswick River. Not such a big deal except that the tide had turned on them, moving swiftly out to sea. Even we were slogging against it in our big boat with an engine. They were struggling.

I hailed the Coast Guard to make sure someone knew they were out there. The Coast Guard had a boat nearby and went to investigate.

And, at long last, we headed up the channel to our new home under sunny skies and only a breath of wind. We glided into our slip, turned off the engine and, just to make this day a little more emotion-packed, we drank a toast to my old friend, Dale, gone now too long to be believed.

Dale's commemorative wine.
The lesson here: Don't take the ICW lightly. This week dealt us some real challenges. When you go out on the water, you have to be ready for whatever awaits.

We've fielded everything thrown at us and arrived, safe, tired and happy, at peace in Brunswick.

Georgia -- and Paris -- on our minds.

Thursday, June 7, 2012

CONTINUING SAGA

Shellbine Creek, GA 30º54.770N | 81º29.663W


This morning dawned overcast and spitting rain, but we have a bead on Brunswick, only 30 miles north, our final stop for the next few months as we hunker down the boat for hurricane season and prepare for our month in Paris. Let's just say, with all the weather challenges of the last few days, tucking into a quiet, safe marina sounded like paradise.

We lifted the anchor and pulled across the channel for a fuel-up when they opened at 7 a.m. Are manatees good luck? Not sure, but it was thrilling to watch this gentle, whale-like manatee having a little spa moment in the warm runoff from our exhaust.


Ah, warm water.
Off we went, optimistic and fixated on free laundry and hot showers. Rounding the northern end of Amelia Island, at the St. Mary's inlet, the clouds were making a beautiful display beyond the fort.


But the reason they were so dramatic is that a stationary front has been sticking like velcro across the Georgia-Florida border, causing wind, rain, squalls and a puzzle for the weather predictors, who keep getting it wrong, wrong, wrong. We desperately wanted to get north of the ridge, and we weren't the only ones. We spoke to several other boats along the way who were on the same mission.

It was with a certain sense of foreboding that I looked north at the dark clouds, a backdrop for an equally foreboding nuclear power plant. Soon it was raining. Then it was pouring. We kept plodding. At least it wasn't blowing. Yet.

Today's hurdle, and the last real obstacle between us and Brunswick: St. Andrew's Sound, at the northern tip of Cumberland Island (the lower right tip on that chart) and Jekyll Island just to the north. The first time we traversed St. Andrew's, I was shocked that the "intracoastal waterway" took us basically out into the ocean, through shallow water between two shoals. We have passed that way twice, both times it was like gliding on glass.

As we inched our way north, it was apparent that the Sound would not be glassy. The wind started picking up from the northeast, which would leave that Sound terribly exposed. (Outer Bankers: Imagine the Albemarle Sound open to the ocean with a stiff northeast wind.) The wind had just clocked around from the west, so perhaps, just perhaps, the swell hadn't had time to build up.

My shift came up as we were approaching the Sound (of course, sigh), just as the Cumberland River was widening.

We were almost to A1 on that map, which is an anchorage inside Cumberland Island.

Dark clouds ahead.
Let's review: We are approaching an exposed sound. The wind is now a steady 25, gusting higher. It's pouring rain. Visibility is bad. The heavy swell is already starting.

Here's the soundtrack going through my head:
--I used up a good amount of boat karma getting through the St. John's River yesterday.
--We just fueled up, and if, on the off-chance, we got bad fuel, getting tossed around in the sound would mean dead engine.
--Brunswick and safe harbor is only 20 miles away! Can you just please, please let us through?
--Anchorages available are okay, but squalls are predicted overnight.
--Will tomorrow -- or the day after -- be any better?
--The Cumberland anchorage on the southern tip of the island is well protected but at least two hours behind us.
--AAAAARRGGHHHHHH!

To add further to the frustration, the weather prediction had been for 10-15 knot wind and light chop, so it's not like we chose this.

I was at the helm, and on our boat, whoever is helming is captain. After rolling all the options around in my head for awhile, I chose the toughest option of all: I turned the boat around. It's defeating. You know you're backtracking, and to add further to the defeat and second-guessing, other boats were going on ahead. (That used to bother me a lot more than it does now. Let them have the crappy conditions.) The bottom line: we're supposed to be having fun. Unfortunately, 'fun' wasn't available in any of our bad options at that point.

We had an extended discussion about the anchorage marked A1. Coincidentally, we had tried to anchor there two years ago and didn't like it, even in fair weather. Instead we went back a tedious two miles, 45 minutes, to Shellbine Creek, on the lower left of the chart above and here's a closeup.

We anchored above the green one, about where the 9 is.
Looking at the chart, you think, oh, that will be so protected, but that's the first lesson we learned about Georgia anchorages two years ago: they are in marshland. Shellbine is a little creek running through marsh grass. No trees, hills, nothing. So, no wind block and very narrow, but good old Georgia mud that swallows the anchor like quicksand.

We found a spot in the creek that was only six feet deep at low tide, which helped our anchor chain ratio (supposed to be up to 10 times the depth, especially in heavy weather). With the creek being so narrow, we could only put out about 70 feet of chain, and, get this: six feet of tide, which would put us in 12 feet of water with only 70 feet of chain with wind in the mid 20s and squalls predicted overnight. The best I could do was put out extra snubber line (a rope hooked to the anchor chain that drops the pressure point well below the waterline, which helps the anchor to stay dug in).

The cushy night at a marina? Not tonight. Not for us. Could be a long one.